Skip to content

Roller System

The NICE Roller System is a modular solution for FRC intakes, indexers, and shooters. It includes roller hardware and high-grip surface materials for picking up, guiding, and moving game pieces.

The metal Roller System is designed for strength, precision, and reuse. Its separate components can be assembled as an end plug alone, an end plug with one pulley, or an end plug with two pulleys. With two end-plug sizes, there are 6 configurations to suit different roller diameters, drive layouts, and space constraints. Shared components also simplify spare-parts stocking.

Silicone grip tape adds a wear-resistant, high-friction surface to a roller. It helps game pieces engage consistently during pickup, guiding, and transfer. NICE offers this textured tape as a cost-effective alternative to similar roller grip materials.

Buy on Taobao
  • Modular parts let you choose the pulley configuration
  • High-strength aluminum alloy construction
  • Locknut housed inside the shaft
  • Accommodates 10mm-wide timing belts
  • Fits two round-tube sizes
Roller system configurations

End plugs fit two roller tube sizes: Φ35mm*Φ31mm (NICE-07-05-001) and Φ50mm*Φ46mm (NICE-07-05-002). All roller pulleys have 22T and can be stacked to suit the drive layout.

Name Notes Quantity
Roller end plug 31mm outside diameter 1
Bearing 6701zz 2
M322 button head hex socket screw For a single roller pulley 4
M335 button head hex socket screw For two roller pulleys 4
Name Notes Quantity
Roller timing pulley HTD5M, 22 teeth, 12 mm face width 1
Name Notes Quantity
Roller shaft — short For end plug only 1
M545 button head hex socket screw For end plug only 1
M5 locknut - 1
Φ12 external retaining ring - 1

You will need:

  • Metric hex keys (2.0, 3.0, 4.0)
  • External retaining-ring pliers
Pressing bearings into the end plug
Use a suitable bearing press tool to install the bearings at both ends.
Pressing bearings into the single-pulley assembly
Use a suitable bearing press tool to install the bearings on both sides.
Pressing bearings into the two-pulley assembly
Use a suitable bearing press tool to install the bearings on both sides.
Roller tube preparation dimensions
SKU Name Size Drawing Onshape
NICE-07-05-001 Roller end plug 31mm OD; includes 2 bearings and 8 screws PDFNICE-D-07-05-01.pdf
NICE-07-05-002 Roller end plug 46mm OD; includes 2 bearings and 8 screws PDFNICE-D-07-05-01.pdf
NICE-07-05-003 Roller timing pulley HTD5M 22T PDFNICE-D-07-05-01.pdf
NICE-07-05-004 Roller shaft Short, 38.5mm; includes 1 long screw and 1 retaining ring PDFNICE-D-07-05-01.pdf
NICE-07-05-005 Roller shaft Standard, 52mm; includes 1 long screw and 1 retaining ring PDFNICE-D-07-05-01.pdf
NICE-07-05-006 Roller shaft Long, 65.5mm; includes 1 long screw and 1 retaining ring PDFNICE-D-07-05-01.pdf
Buy on Taobao
  • Raised grid texture for high grip
  • Low-abrasion contact surface
  • Flexible, adhesive-backed construction
  • Excellent wear resistance
SKU Width Length
NICE-07-05-007 50mm 3m