Skip to content

Sprockets & Chain

Sprocket and chain dimensions
Name Description
Pitch Distance between adjacent chain pin centers; determines the chain size
Pitch diameter Diameter of the theoretical circle through the chain pin centers as the chain wraps around the sprocket
Outside diameter Diameter measured over the sprocket tooth tips
Chain clearance diameter Maximum outside envelope with the chain fitted; allow this space in your design

A chain drive needs the right amount of tension to operate reliably.

Too loose:

  • The chain may skip teeth or come off the sprocket
  • Wear increases
  • Lost motion delays the mechanism’s response

Too tight:

  • Excessive loading on the chain, bearings, and shafts
  • More friction consumes motor power
  • Shorter component life

Correctly tensioned:

  • Smooth, reliable power transmission
  • Lower wear
  • Better efficiency
Examples of chain tension

Use a chain breaker and a master link to add or remove links.

Use this when: the chain is clearly too loose or too tight.

Buy on Taobao
NICE aluminum sprocket
  • ½″ hex bore, compatible with standard ½” hex and rounded-hex shafts
  • 7075-T6 aluminum alloy with black anodizing
  • Alignment marks help you set both sprockets to the same angular position
SKU Weight Tooth count Drawing CAD model Onshape
NICE-02-02-001 10g 18t PDFNICE-D-02-02-01 (1).pdf STEPNICE-02-02-001 (1).step
NICE-02-02-002 14g 22t PDFNICE-D-02-02-01 (1).pdf STEPNICE-02-02-002 (1).step
SKU Weight Tooth count Drawing CAD model Onshape
NICE-02-02-003 20g 15t PDFNICE-D-02-02-02.pdf STEPNICE-02-02-003 (2).step
  • Sizes: #25 / #25H / #35
  • Length: 10ft (approximately 3m)
  • Material: high-strength chain steel
Buy on Taobao SKU Weight Size Length (ft)
Buy on Taobao NICE-02-02-005 455g #25 10
Buy on Taobao NICE-02-02-004 531g #25H 10
Buy on Taobao NICE-02-02-006 1049g #35 10
Buy on Taobao
  • Sizes: #25 / #25H / #35
  • Quantity: 5 per pack
SKU Weight Size
NICE-02-02-007 1g #25
NICE-02-02-008 1g #25H
NICE-02-02-009 4g #35
Buy on Taobao
NICE chain tensioner

Installation:

  1. Unscrew both attachment bolts from the center body.
  2. Use a chain breaker to attach a bolt to each chain end.
  3. Align both bolts with the threaded ends of the center body.
  4. Turn the center body to tension the chain.
  • Sizes: #25 / #25H / #35
  • Center body accepts M6 bolts for a secure connection
SKU Weight Size Drawing CAD model Onshape
NICE-02-02-010 16g #25/#25H PDFNICE-D-02-02-03.pdf STEPNICE-02-02-010.step
NICE-02-02-011 #35 PDFNICE-D-02-02-03.pdf STEPNICE-02-02-011.step