Sheet Material
SRPP Composite Sheet
Section titled “SRPP Composite Sheet”
Self-reinforced polypropylene (SRPP) combines polypropylene fibers with a polypropylene matrix to form a lightweight, tough sheet. Using the same material family for both phases produces a well-bonded composite with good impact resistance, flex resistance, and energy absorption.
Compared with carbon fiber sheet, SRPP prioritizes flexibility, ductility, and remaining intact under impact over maximum stiffness. It is less prone to delamination or brittle fracture under load. Compared with polycarbonate (PC), it offers higher stiffness and strength at lower density, while absorbing impact through bending and stretching.
For FRC robots, SRPP is well suited to intakes, guards, and impact panels that repeatedly experience contact, compression, or flexing.
Machining and Cutting
Section titled “Machining and Cutting”Reference machining parameters
| Laser rating | Maximum power | Minimum power | Speed | Passes |
|---|---|---|---|---|
| 80W | 95% | 90% | 15mm/s | 3 passes |
Tool: D4 single-flute end mill
| Spindle speed | Cutting feed rate |
|---|---|
| 24000 rpm | 4000 mm/min |
SRPP Composite Sheet
Section titled “SRPP Composite Sheet”| SKU | Dimensions | Thickness |
|---|---|---|
| NICE-06-02-001 | 900mm*600mm | 6mm |