3D Printing Inserts
3D printing is increasingly used to make pulleys, gears, and other power transmission parts. However, printed parts can have several limitations:
- Limited torque capacity
- Deformation around areas of concentrated stress
- Inconsistent dimensional accuracy
NICE 3D printing inserts address these issues with a 6061-T6 aluminum body weighing just 3.4g. The insert reinforces the printed part and helps distribute stress around the shaft interface.
How to Use
Section titled “How to Use”Installing an Insert in a Pulley
Section titled “Installing an Insert in a Pulley”
The insert helps prevent cracking and deformation caused by concentrated stress, while allowing the pulley to be printed with substantially less infill.
NICE Pulley Generator
Section titled “NICE Pulley Generator”
- HTD 5mm/3mm tooth profiles
- Adjustable face width and tooth count
- One-click weight-relief pockets
- Additional bore options for inserts and dead-shaft mounting
NICE Printing Inserts for 1/2” Shafts
Section titled “NICE Printing Inserts for 1/2” Shafts”
| SKU | Weight | Compatible hex shaft | Drawing | CAD model | Onshape |
|---|---|---|---|---|---|
| NICE-04-03-001 | 3.4g | 1/2inch | PDFNICE-D-04-03-01.pdf | STEPNICE-04-03-001.step |